F 250 4WD Super Duty V10-6.8L VIN Z CNG (2003)
4. Position the electrical connector as shown and pull it through the seat opening.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: Make sure to tighten nuts to specification.
2. Check the active restraint system for correct operation.
Front Captain's Chair
REMOVAL
All vehicles
1. Position the front seat to its highest and rear most position.
2. Remove the safety belt buckle.
1
Remove the nut.
2
Remove the safety belt buckle.
NOTE:
^
The driver side is shown, the passenger side is similar.
^
The passenger side safety belt buckle is not equipped with a safety belt warning indicator switch wire harness and electrical connector.
Driver seat Only