F 250 4WD Super Duty V10-6.8L VIN Z CNG (2003)
1. Remove the shoulder safety belt guide.
1
Position the shoulder safety belt guide cover up.
2
Remove the shoulder safety belt guide nut.
3
Remove the shoulder safety belt guide.
NOTE: Inspect the shoulder safety belt guide and cover for damage. If the shoulder safety belt guide or cover is damaged or cover does not
remain closed, install a new shoulder safety belt guide.
2. Remove the front door scuff plate, the rear door scuff plate, the rear assist handle and the center body pillar trim panel.
3. Remove the height adjuster cover.
