ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Parking Assist Switch > < Outer Left|Page 1699
Page 1
background image

Parking Assist Distance Sensor: Description and Operation

PARKING AID

Four Ultrasonic Parking Aid Sensors (located in the rear bumper)

The parking aid system detects objects behind the vehicle when the vehicle is in reverse (R) gear. The parking aid module (PAM) does this by
calculating the distance to an object by the use of four ultrasonic sensors mounted in the rear bumper.

The ultrasonic field is emitted in a semicircular area around the rear of the vehicle. The sensors can detect objects approximately 1.8 m (5.9 ft) to the
rear of the vehicle, 50 cm (1.6 ft) to the rear side of the vehicle. A 750 kHz variable warning tone is generated from a speaker located inside the RH
cowl kick panel. The speaker increases its warning tone rate as the vehicle gets closer to an obstacle. When an object is detected within 25 cm (10 in) of
the sensors, the warning tone becomes continuous.

Parking Assist Switch > < Outer Left|Page 1699