F 250 4WD Super Duty V10-6.8L VIN Z CNG (2003)
Pitman Arm: Service and Repair
Sector Shaft Arm
Special Tool(s)
Special Tool(s)
Removal and Installation
NOTE: Replace the steering gear sector shaft arm if it is bent. If the steering gear sector shaft arm is bent, check remainder of the steering linkage
system for signs of damage. Replace any damaged steering linkage parts as required. Do not attempt to straighten the steering gear sector shaft arm or
any other steering linkage components.
All vehicles
1. Position and lock the wheels in the straight-forward position. Raise and support the vehicle.
F-450 to F-550 4x2 and all 4x4 vehicles
2. Remove the track bar.
3. Remove the bolts.
4. Remove the nut, bolt and the track bar bracket.
All vehicles
