F 250 4WD Super Duty V10-6.8L VIN Z CNG (2003)
2. Lower the vehicle.
3. CAUTION: Failure to tighten the lug nuts in the sequence shown can result in high wheel and tire runout, which will speed up the development of
brake roughness, shudder and vibration.
With the weight of the vehicle on the tires, tighten the lug nuts to specification in the sequence shown.
4. Install the wheel cover, if so equipped.
5. Advise the customer that the lug nuts need to be retightened at 800 km (500 miles) after wheel change or any other time the lug nuts have been
loosened. This is required to permit the wheel clamping system to seat properly so that the lug nuts will hold a uniform clamp load and remain
fully tightened.
