F 250 4WD Super Duty V10-6.8L VIN Z CNG (2003)
Parking Pawl: Service and Repair
Automatic Transmission - TorqShift
Park System
Special Tool(s)
Removal
All vehicles
1. With the vehicle in NEUTRAL, position on a hoist.
4x4 vehicles
2. Remove the transfer case.
4x2 vehicles
3. Remove the rear driveshaft.
Vehicles equipped with a fixed yoke
4. Remove the output shaft flange.
1
Remove and discard the output shaft flange bolt.
2
Remove the output shaft flange.
All vehicles
5. Using a suitable transmission jack, support the transmission.
6. Remove the bolts, and raise the transmission upward, off the rear mount.
