F 250 4WD Super Duty V10-6.8L VIN Z CNG (2003)
3. Using the special tools, remove the extension housing seal.
4. CAUTION: Do not damage any machined surfaces. Damage can cause the new seal to leak.
Using the special tool, remove the extension housing bushing.
Installation
1. CAUTION: Prior to installing the extension housing bushing, inspect the extension housing counterbore for burrs. If necessary, remove the burrs
with an oil stone or damage to new bushing can occur.
Align the extension housing bushing in the extension housing so that the lube slots is in the 7 o'clock position over the lube hole in the extension
housing.
2. Using the special tools, install the extension housing bushing.
