F 250 4WD Super Duty V10-6.8L VIN Z CNG (2003)
Shift Cable: Service and Repair
Cable and Bracket Adjustment
Cable and Bracket Adjustment
1. Place the gearshift lever in the (D) position.
^
Place a three pound weight on the gearshift lever.
2. Position the vehicle on a hoist.
3. For vehicles equipped with the 4R100 transmission, disconnect the transmission shift cable from the manual lever.
4. For vehicles equipped with the TorqShift transmission, disconnect the transmission shift cable from the manual lever.
5. Unlock the lock tab on the transmission shill cable.
6. For either automatic transmission, place the manual control lever in the (D) position (4R100 shown).
1
Place the manual control lever in the first gear position.
2
Move the manual control lever two detents to the (D) position for the 4R100 transmission. Move the manual control lever three detents to the
(D) position for the TorqShift transmission.
