F 250 4WD Super Duty V10-6.8L VIN Z CNG (2003)
Transmission Mount: Service and Repair
Transmission Insulator and Retainer
Removal
1. With the vehicle in NEUTRAL, position on a hoist.
2. Remove the rear transmission support insulator.
1
Remove the rear transmission support insulator nuts.
2
Remove the rear transmission support insulator bolts.
3. Using a suitable high-lift transmission jack, remove the rear transmission support insulator.
1
Raise the transmission upward, off the transmission support insulator.
2
Remove the rear transmission support insulator.
Installation
1. Install the rear transmission support insulator.
1
Install the rear transmission support insulator.
2
Lower the transmission onto the transmission support insulator.
2. NOTE: It may be necessary to raise the back of the transmission slightly in order to install the bolts.