F 250 4WD Super Duty V10-6.8L VIN Z CNG (2003)
6. Connect the driveshaft.
7. Connect the rear anti-lock brake sensor electrical connector.
8. Remove the fill plug.
9. CAUTION: A lubricant level close enough to the bottom of the fill hole to be seen or touched is not sufficient. The lubricant must be level with
the fill hole.
Fill the axle with Motorcraft SAE 80W-90 Premium Rear Axle Lubricant XY-80W90-QL or equivalent meeting Ford specification
WSP-M2C197-A until the lubricant is level with the fill hole.
