F 250 4WD Super Duty V10-6.8L VIN Z CNG (2003)
7. NOTE: Do not remove the pinion bearing cups from the carrier casting unless the cups are damaged.
Remove the outer differential bearing cup with the special tools.
8. Remove the inner differential bearing cup with the special tool.
Installation
Using 20S-098
1. Install the inner and outer bearing cups.
1
After placing the inner and outer bearing cups in their bores, place the special tool on the inner pinion bearing cup.
2
Place the special tool on the outer pinion bearing cup.
3
Install the special tool into the replacer tools.
2. Tighten the special tool to install the pinion bearing cups into their bores.
