F 250 4WD Super Duty V10-6.8L VIN Z CNG (2003)
Drive/Propeller Shaft: Service and Repair
Disassembly and Assembly
Driveshaft Center Bearing
Center Bearing
Disassembly and Assembly
1. CAUTION: Do not clamp the driveshaft in the jaws of a vice or a similar holding fixture.
Place the driveshaft on a suitable workbench.
2. On reverse slip driveshafts, while using a suitable flange holding tool to prevent shaft rotation, remove the flange retaining nut.
3. On reverse slip driveshafts, remove the flange.
4. Remove the rubber insulator surrounding the bearing.
1
Remove the driveshaft center bearing retainer.
2
Remove the driveshaft center bearing bracket.
3
Remove the rubber insulator.