F 250 4WD Super Duty V10-6.8L VIN Z CNG (2003)
Seals and Gaskets: Service and Repair
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the front brake disc. See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair
3. Remove the wheel hub and bearing. See: Wheel Hub/Service and Repair
4. Using a drift, drive the axle shaft main seal out of the wheel knuckle.
5. Remove the axle shaft and main seal.
