F 250 4WD Super Duty V10-6.8L VIN Z CNG (2003)
6. Remove the nut, the fluid cooler tube bracket and the fluid cooler tubes.
7. Remove the three bolts from the remote mounted transmission oil filter bracket.
8. Remove the inlet and outlet lines from auxiliary fluid cooler and radiator in-tank reservoir.
1
Remove the cooler line clips.
2
Disconnect the fluid lines from the radiator in-tank reservoir.
3
Remove the constant tension clamp from the auxiliary cooler outlet and disconnect the hose.
4
Remove the constant tension clamp from the fluid filter return inlet line and disconnect the hose.
Installation
1. Install the inlet and outlet lines from auxiliary fluid cooler and radiator in-tank reservoir.
1
Install the cooler line clips.
2
Connect the fluid lines to the radiator in-tank reservoir.
3
Connect the hose and install the constant tension clamp from the auxiliary cooler outlet.
4
Connect the hose and install the constant tension clamp from the fluid filter return inlet line.
