F 250 4WD Super Duty V10-6.8L VIN Z CNG (2003)
Wiper Motor Linkage: Service and Repair
WIPER MOUNTING ARM AND PIVOT SHAFT
REMOVAL
1. Remove the cowl top vent panels.
WIPER MOUNTING ARM AND PIVOT SHAFT
2. Remove the wiper mounting arm and pivot shaft.
1
Remove the five bolts.
2
Disconnect electrical connector.
3
Remove the wiper mounting arm and pivot shaft assembly.
3. If necessary, remove the wiper motor.
INSTALLATION
1. To install, reverse the removal procedure.
