F 250 4WD Super Duty V8-5.4L (2009)
Repair Two (2) Rear Door
Handles And This Labor
Operation May Be Claimed
With Operation A Or B (Do
Not Use With 23943A,
23943A7, 27406B,
27406B6)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
2522405
24
Disclaimer
Technical Service Bulletin # 09-12-1
Date: 090629
Body - Exterior Door Handle Loose
TSB 09-12-1
06/29/09
EXTERIOR DOOR HANDLE LOOSE - BUILT BEFORE 11/1/2008
FORD:
2008-2009 F-Super Duty
ISSUE
Some 2008-2009 F-Super Duty vehicles with a build date before 11/1/2008 may exhibit an exterior door handle assembly which is loose or appears to be
broken. The pivot pin that keeps the door handle in place may not be properly seated and/or may back out of position.
ACTION
Check that the pivot pin is fully seated and retained in the door handle assembly. Follow the Service Procedure steps to correct the condition.
SERVICE PROCEDURE
1. Remove exterior door handle assembly following Workshop Manual (WSM), Section 501-14.
2. With exterior door handle removed from vehicle, inspect exterior door handle assembly for pivot pin placement at pin head. (Figure 1)