F 250 4WD Super Duty V8-5.4L (2009)
Rear Door Window Motor: Service and Repair
Window Regulator Motor - Rear Door
Window Regulator Motor - Rear Door
Removal and Installation
1. Remove the rear door trim panel and the rear door trim watershield.
2. Remove the door speakers.
3. Secure the window glass with tape.
4. Disconnect the window regulator electric drive.
5. Position the connector for the window regulator electric drive inside of the door.
6. Remove the bolts.
-
To install, tighten to 13 Nm (115 lb-in).
7. Separate the window regulator electric drive from the rear door window regulator.
8. Remove the window regulator electric drive from the door.
9. To install, reverse the removal procedure.