F 250 4WD Super Duty V8-5.4L (2009)
5. Lower the glove compartment.
1. Open the glove compartment.
2. Depress the glove compartment stop and fully lower the glove compartment.
6. Through the glove compartment opening, disconnect the headliner electrical connector that is located at the RH instrument panel, toward the front
of the vehicle.
7. Remove the RH and LH B-pillar trim panels. For additional information, refer to B-Pillar Trim Panel - Regular Cab See: Trim Panel/Service and
Repair/B-Pillar Trim Panel - Regular Cab.
8. Remove the RH and LH rear garment hooks.
9. NOTICE: Make sure not to crease the headliner when removing it from the vehicle.
With an assistant, remove the headliner.
10. To install, reverse the removal procedure.