F 250 4WD Super Duty V8-5.4L (2009)
2. Remove the assist handle bolts.
-
To install, tighten to 12 Nm (106 lb-in).
3. NOTE: Carefully rotate the A-pillar trim panel during this step.
Remove the A-pillar trim panel.
4. NOTICE: To avoid damage to the A-pillar trim panel, remove any retaining clips from the body and attach them to the A-pillar trim
panel before installing.
To install, reverse the removal procedure.
B-Pillar Trim Panel - Crew Cab
B-Pillar Trim Panel - Crew Cab
Removal and Installation
1. Remove the front and rear door opening scuff plate trim panels.
2. Position front seat(s) to the forwardmost position.
3. Remove the rear assist handles.
1. Remove the 2 covers.
2. Remove the 2 bolts.
-
To install, tighten to 12 Nm (106 lb-in).
3. Remove the B-pillar assist handle.
4. Position aside the front and rear door opening weatherstrips.
