F 250 4WD Super Duty V8-5.4L (2009)
12. Remove the LH recliner-to-backrest frame bolts.
-
To install, tighten to 50 Nm (37 lb-ft).
13. Remove the LH recliner from the recliner torque shaft.
14. Remove the recliner torque shaft from the RH recliner and the clips.
-
Remove the recliner torque shaft clips from the backrest frame.
15. Remove the RH recliner-to-backrest frame bolts and remove the RH recliner.
-
To install, tighten to 50 Nm (37 lb-ft).
Vehicles with armrest
16. Remove the bolts and the LH and RH armrest brackets.
-
To install, tighten to 50 Nm (37 lb-ft).
All vehicles
17. To assemble, reverse the disassembly procedure.
Seat Backrest - Front, Bucket Seat
Seat Backrest - Front, Bucket Seat
Bucket Seat Backrest
NOTE: LH shown, RH similar.