F 250 4WD Super Duty V8-5.4L (2009)
Parking Brake Cable: Removal and Replacement
Parking Brake Cable - LH
Parking Brake Cable - LH
NOTE: F-250/350 shown, F-450/550 similar.
Removal and Installation
All vehicles
1. Release the tension on the rear parking brake. For additional information, refer to Parking Brake Cable Tension Release See: Procedures.
2. Disconnect the RH cable from the LH conduit equalizer, then disconnect the LH cable from the front cable.
3. Remove the 2 wire form bracket bolts from the frame rail and position the cable and conduit aside.
-
To install, tighten to 40 Nm (30 lb-ft).
F-250 and F-350 vehicles
4. NOTE: The parking brake cable and conduit must be routed to the outside of the leaf spring assembly.