F 250 4WD Super Duty V8-5.4L (2009)
Crankshaft Main Bearing Seal: Service and Repair
Crankshaft Rear Seal
Crankshaft Rear Seal
Removal
1. Remove the flexplate or flywheel. For additional information, refer to Flexplate See: Transmission and Drivetrain/Flex Plate/Service and
Repair/Removal and Replacement or Flywheel See: Service and Repair/Removal and Replacement/Flywheel.
2. Remove the engine rear cover plate.
3. Using the Slide Hammer and the Crankshaft Rear Oil Slinger Remover, remove and discard the crankshaft oil slinger.