F 250 4WD Super Duty V8-5.4L (2009)
Heater Core: Testing and Inspection
Heater Core
Climate Control System
Component Tests
Heater Core
1. NOTE: Testing of returned heater cores reveals that a large percentage of heater cores are good and did not require the installation of a new heater
core. If a heater core leak is suspected, the heater core must be tested by following the plugged heater core component test before the heater core
pressure test. Carry out a system inspection by checking the heater system thoroughly as follows:
Inspect for evidence of coolant leakage at the heater hose to heater core attachments. A coolant leak in the heater hose could follow the heater core
tube to the heater core and appear as a leak in the heater core.
2. NOTE: Spring-type clamps are installed as original equipment. Installation and overtightening of non-specified clamps can cause leakage at the
heater hose connection and damage the heater core.
Check the integrity of the heater hose clamps.