F 250 4WD Super Duty V8-5.4L (2009)
PCV Heater: Service and Repair
Positive Crankcase Ventilation (PCV) Heater Element - 5.4L
Removal
1. Disconnect the PCV heater element electrical connector.
2. Disconnect the quick connect couplings and remove the PCV tube.
3. Remove the 2 bolts and the PCV heater element.
-
Discard the PCV heater element.
Installation
1. Install the new PCV heater element and the 2 bolts.
-
Tighten to 10 Nm (89 lb-in).
2. Position the PCV tube and connect the quick connect couplings.
3. Connect the PCV heater element electrical connector.
