F 250 4WD Super Duty V8-5.4L (2009)
Steering Damper: Service and Repair
Steering Linkage Damper - F-250 and F-350 Four Wheel Drive (4WD), F-450, F-550
Removal and Installation
1. Place the steering wheel in the straight-ahead position.
2. With the vehicle in NEUTRAL, position it on a hoist.
3. Remove the steering linkage damper-to-frame bracket bolt and nut.
-
To install, tighten the bolt to 90 Nm (66 lb-ft).
4. Remove the steering linkage damper-to-drag link nut and remove the steering linkage damper.
-
To install, tighten the nut to 90 Nm (66 lb-ft).
5. To install, reverse the removal procedure.