F 250 4WD Super Duty V8-5.4L (2009)
Wheel Fastener: Service and Repair
Front Suspension
Wheel Studs
Removal
1. Remove the wheel and tire.
2. NOTICE: Do not allow the caliper assembly to hang from the brake hose or damage to the hose may occur.
Remove the 2 caliper anchor plate bolts and position the caliper assembly aside.
-
Support the caliper assembly using mechanic's wire.
3. Index-mark and remove the brake disc.
4. Using the C-Frame and Clamp Assembly, remove and discard the wheel stud.