Service and Repair of Rear Door Exterior Handle for Supercab Model
Rear Door Exterior Handle: Service and Repair
Supercab
REMOVAL
1. Remove the rear door interior trim panel.
2. Disconnect all necessary control rods from the remote control.
3. Remove the outside door handle.
1. Drill out the rivets.
2. Remove the outside door handle.
INSTALLATION
1. Install the outside door handle; refer to Specifications for the correct replacement of the outside door handle rivets.
NOTE: If the component is to be replaced, refer to the Ford Master Parts Catalog for specific part information.
2. Follow the removal procedure in reverse order.
