F 250 4WD Super Duty V8-5.4L SOHC VIN L (1999)
Lifter / Lash Adjuster: Service and Repair
Roller Followers
Special Tools
Removal
1. Remove the valve cover.
2. Position the piston of the cylinder being repaired at the bottom of the stroke.
3. Install the Valve Spring Spacer between the valve spring coils to prevent valve stem seal damage.
4. NOTE: The roller followers must be installed in their original locations. Record roller follower locations.
Use the Valve Spring Compressor to compress the valve springs and remove the cam roller followers.
