F 250 4WD Super Duty V8-5.4L SOHC VIN L (1999)
12. Remove the air bag sliding contact.
1
Pry the upper and RH retaining clips loose.
2
Remove the air bag sliding contact.
Installation
1. WARNING: Always wear safety glasses when repairing an air bag supplemental restraint system (SRS) vehicle and when handling an air bag
module.
WARNING: Carry a live air bag module with the air bag and deployment door pointed away from your body. This will reduce the risk of injury in the
event of an accidental deployment.
WARNING: Never probe the connectors on the air bag module. Doing so can result in air bag deployment, which can result in personal injury.
NOTE: Repair is made by replacement only. If a part is replaced and the new part does not correct the condition, install the original part and perform
the diagnostic procedure again.
Follow the removal procedure in reverse order.
-
If a new air bag sliding contact is being installed, remove the anti-rotation tab.
