F 250 4WD Super Duty V8-5.4L SOHC VIN L (1999)
4. Remove the passenger air bag module.
1
Using a 3/8-inch x 4-inch flat head screwdriver, or equivalent, carefully slide the head of the screwdriver under the right bottom edge of the
door and lift upward, separating the door from the clip. Separate the rest of the door from the clips by lifting the door with your hands.
2
Remove the passenger air bag module.
INSTALLATION
NOTE:
-
Repair is made by replacement only. If a part is replaced and the new part does not correct the condition, install the original part and perform the
diagnostic procedure again.
-
Make sure to tighten the retaining bolts to specification.
1. Follow the remove procedure in reverse order.
-
Place six new offset fasteners onto the deployment door.
