F 250 4WD Super Duty V8-5.4L SOHC VIN L (1999)
Child Restraint: Description and Operation
Tether Attachment
Some manufacturers make safety seats with a tether strap that goes over the back of the vehicle seat and attaches to an anchoring point behind the seat.
Ford recommends the placement of tethered safety seats in a rear seating position, with the tether strap attached to the tether anchoring point. The right
front seating position can be used if it is the only seating position available. The tether anchor attachment point for the right front seating position is
located on the back panel of the cab.
Tether Anchor Hardware
Three tether anchor points are provided on the back panel of the cab for child safety seats requiring a tether anchor. Tether anchor hardware kits are
available at no cost through Ford or Lincoln-Mercury dealership parts departments. These kits have instructions and hardware specific to the
applicable vehicle.
