F 250 4WD Super Duty V8-5.4L SOHC VIN L (1999)
1. Install the safety belt tongue.
1
Position the safety belt tongue.
2
Make sure the safety belt tongue is positioned in the retaining strap.
3
Use the T-55 Torx bit to install the safety belt tongue bolt.
2. Install the safety belt buckle.
1
Position the safety belt buckle.
2
Make sure the safety belt buckle is positioned in the retaining strap.
3
Use the T-55 Torx bit to install the safety belt buckle.
3. Check the restraint system for proper operation.
Front - Bench Seat
Torx Bit Tool Set Used For T55 "Torx Plus" Bit
Special Tool(s)
REMOVAL
1. Remove the utility tray, if necessary.
2. Remove the safety belt buckle bolts.
1
Use the T-55 Torx bit to remove the LH safety belt buckle bolt.
2
Disconnect the safety belt warning indicator switch connector.
3
Use the T-55 Torx bit to remove the RH safety belt buckle bolt.
