F 250 4WD Super Duty V8-5.4L SOHC VIN L (1999)
1. Grasp the belt tongue and pull down on the closest belt webbing to form a loop through the upper (narrower and longer) slot in the tongue.
2. Working within the upper slot, rotate and fold the belt webbing over itself as required to remove the twist.
3. Pull the excess belt webbing back through the upper slot in the tongue.
4. Repeat Steps 1-3 to complete the removal of the twist at the lower (wider and larger) slot in the tongue.
5. When completed, the safety belt should look like the illustration.
Front Safety Belt and Tongue
Safety Belt Bolt Bit
Special Tool(s)
REMOVAL
NOTE: Safety belt buckles, height adjusters, center adjust tongues and belts and retractors can be replaced separately. However, if a safety belt
assembly was in use during a collision, the belt and retractor must be replaced as well as the center adjust tongue and belt and buckle assembly or the
center adjust tongue and the cable and buckle assembly. When replacing safety belts and buckles, height adjusters, safety cables and buckles, center