F 250 4WD Super Duty V8-5.4L SOHC VIN L (1999)
adjust tongues and belt and retractors, use only the replacement parts specified in the Ford Master Parts Catalogs for the make and model of the
vehicle being serviced. Safety belt assemblies must not be interchanged between vehicle models.
1. Remove the shoulder strap guide.
1
Position the shoulder strap guide cover up.
2
Remove the shoulder strap guide nut.
3
Remove the shoulder strap guide.
2. Remove the front door scuff plate, the rear door scuff plate, the rear assist handle and the center body pillar trim panel.
3. Remove the front safety belt retractor.
1
Use the Safety Belt Bolt Bit to remove the bolt.
2
Remove the front safety belt retractor.
4. Remove the front safety belt anchor.
1
Use the Safety Belt Bolt Bit to remove the bolt.
2
Remove the front safety belt anchor.
INSTALLATION
