F 250 4WD Super Duty V8-5.4L SOHC VIN L (1999)
7. Remove the tie rod end castellated nut.
-
Remove the cotter pin.
-
Remove the castellated nut.
8. Using the Pitman Arm Puller, remove the tie rod end from the wheel knuckle.
9. Remove the upper ball joint castellated nut and the insert.
-
Remove the cotter pin.
-
Remove the nut.
-
Remove the insert.
10. Remove the wheel knuckle.
-
Remove the lower ball joint nut.
-
Remove the knuckle.
11. Clean and inspect the wheel knuckle ball joint bores.