F 250 4WD Super Duty V8-5.4L SOHC VIN L (1999)
6. Install the solenoid screen assembly by pushing it in and rotating it to lock.
7. NOTE: Prior to installing the solenoid body assembly, coat the case connector bore with Silicone Dielectric Compound D7AZ-19331-A or
equivalent meeting Ford specification ESE-M1C171-A.
Install the solenoid body assembly.
1
Install the solenoid body assembly.
2
Install the nut.
3
Install the bolts and nut finger-tight.
8. Install the main control valve body.
1
Install the main control valve body.
2
Aligning the manual shift valve with the manual valve detent lever.
3
Install the nuts finger-tight.
4
Install the bolts finger-tight.
