F 250 4WD Super Duty V8-5.4L SOHC VIN L (1999)
2. Adjust the clutch pressure plate.
^
Rotate adjusting ring counterclockwise until the tension springs are compressed.
^
Hold adjusting ring while releasing the pressure on the clutch fingers.
3. Position the clutch disc on the flywheel.
^
Use Clutch Aligner to align the clutch disc.
4. NOTE: If reusing clutch pressure plate and flywheel use marks made during removal.
Position the clutch pressure plate on three dowels.
1
Align the clutch pressure plate.
^
Install the bolts.
2
Remove the Clutch Aligner.
5. Install the transmission.
6. Operate vehicle to check clutch operation.