F 250 4WD Super Duty V8-6.0L DSL Turbo (2003)
Remove the turbocharger inlet Y-pipe-to-EGR cooler clamp by opening up the clamp pushing the clamp down positioning the bottom of the clamp
toward the EGR cooler and then positioning the top of the clamp toward the EGR cooler.
6. Remove the LH turbocharger inlet Y-pipe to exhaust manifold nuts.
7. Remove the RH turbocharger inlet Y-pipe to exhaust manifold nuts.
8. Position the turbocharger inlet Y-pipe to gain access to the turbocharger inlet Y-pipe joint. Remove the bolts separate the turbocharger inlet Y-pipe
joint and remove the gasket. Remove the 2 parts of the turbocharger inlet Y-pipe.
Installation
NOTE: When installing the turbocharger inlet Y-pipe into the vehicle do not bend or twist the flex bellows.
NOTE: Only tighten the turbocharger inlet Y-pipe fasteners with hand tools.