F 250 4WD Super Duty V8-6.4L DSL Turbo (2008)
Disassembly and Assembly
1. Remove the front seats.
2. Remove the front seat.
3. Remove the seat backrest.
4. Remove the backrest bracket-to-LH riser bolts.
-
To install, tighten to 50 Nm (37 lb-ft).
5. Remove the backrest bracket-to-cushion frame bolt.
-
Remove the backrest bracket.
-
To install, tighten to 50 Nm (37 lb-ft).
6. Remove the riser-to-cushion frame bolts.
-
Remove the LH and RH riser.
-
To install, tighten to 50 Nm (37 lb-ft).
7. Remove the seat latch.
8. Unfasten the cushion trim cover J-clips. Remove the cushion trim cover and cushion foam pad.
-
If necessary, remove the cushion trim cover from the cushion foam pad.
