F 250 4WD Super Duty V8-6.4L DSL Turbo (2008)
Crew Cab Bucket Seat Cushion (Part 2)
Removal and Installation
NOTE: If both latches need to be removed, repeat steps for other side.
1. Remove the seat cushion.
2. Remove the support-to-latch bolts.
1
Remove the upper support-to-latch bolt.
-
To install, tighten to 33 Nm (24 lb-ft).
2
Remove the lower support-to-latch bolt.
-
To install, tighten to 25 Nm (18 lb-ft).
3. Remove the latch cover.
4. Remove the latch-to-cushion frame bolt and latch.
-
To install, tighten to 50 Nm (37 lb-ft).
5. To install, reverse the removal procedure.
