F 250 4WD Super Duty V8-6.4L DSL Turbo (2008)
5. If equipped, disconnect the vacuum hose connector.
6. Remove the bolts and lift up the degas bottle in order to access the engine-to-degas bottle hose.
^
To install, tighten to 19 Nm (14 lb-ft).
7. Remove the spring clip and disconnect the engine-to-degas bottle hose from the degas bottle. Remove the degas bottle from the vehicle.
^
To install, make sure the spring clip is correctly installed.
8. To install, reverse the removal procedure.
