F 250 4WD Super Duty V8-6.4L DSL Turbo (2008)
LH Side
Removal
1. Remove the RH cylinder head or LH cylinder head.
2. CAUTION: To prevent engine damage, keep the valve tappets in the order in which they were removed. Install all valve tappets back in
their original positions.
Remove the bolts and the valve tappet guides. Remove the valve tappets.
Installation
1. CAUTION: To prevent engine damage, keep the valve tappets in the order in which they were removed. Install all valve tappets back in
their original positions.
Apply clean engine oil to the valve tappets and install into the valve tappet guide. Install the valve tappet guide and the bolts.
^
Tighten to 13 Nm (115 lb-inch).
2. Install the RH cylinder head or LH cylinder head.
