F 250 4WD Super Duty V8-6.4L DSL Turbo (2008)
2. Measure the telescoping gauge with a micrometer. Verify the diameter is within specification.
Connecting Rod Bend
NOTE: Refer to the appropriate information for the specification.
1. Measure the connecting rod bend on a suitable alignment fixture. Follow the instructions of the fixture manufacturer. Verify the bend measurement
is within specification.
Connecting Rod Twist
NOTE: Refer to the appropriate information for the specification.
1. Measure the connecting rod twist on a suitable alignment fixture. Follow the instructions of the fixture manufacturer. Verify the measurement is
within specification.