F 250 4WD Super Duty V8-6.4L DSL Turbo (2008)
Removal
All vehicles
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Disconnect the LH and RH battery ground cable(s). For additional information, refer to Battery.
3. Remove the cooling fan stator. For additional information, refer to Cooling System.
4. Remove the accessory drive belt.
Vehicles with A/C
5. Remove the A/C drive belt.
^
Remove the belt from the bottom of the A/C clutch pulley, then remove it from the crankshaft pulley.
