F 250 4WD Super Duty V8-6.4L DSL Turbo (2008)
31. Install the retaining nut for the power steering hose and tube.
^
Tighten to 25 Nm (18 lb-ft).
32. NOTE: Use a back-up wrench on the high-pressure fuel injection pump fittings.
Install new copper sealing washers, high-pressure fuel injection pump supply tube, high-pressure fuel injection pump-to-fuel cooler return tube and
nuts at the high-pressure fuel injection pump.
^
Tighten to 38 Nm (28 lb-ft).
33. Install the retaining nuts for the high pressure fuel injection pump supply tube.
^
Tighten to 11 Nm (97 lb-inch).
