F 250 4WD Super Duty V8-6.4L DSL Turbo (2008)
LH Exhaust Manifold
Removal
1. Remove the LH turbocharger inlet pipe. For additional information, refer to Exhaust System.
2. Remove the degas bottle. For additional information, refer to Cooling System.
3. Remove the LH front tire and wheel.
4. Remove the LH fender splash shield.
5. Remove the oil level indicator. Remove the nut for the oil level indicator tube.
6. Remove the bolt and position the oil level indicator tube aside.
^
Remove and discard the O-ring seal.
7. Disconnect the anti-lock module electrical connector and position aside.