F 250 4WD Super Duty V8-6.4L DSL Turbo (2008)
Turbocharger Inlet Pipe - LH, 6.4L Diesel (Part 2)
Removal
CAUTION: Do not bend or twist the exhaust gas recirculation (EGR)-oxidation catalytic converter (OC) pipe or damage to the bellow on the
EGR-OC pipe may occur.
CAUTION: Do not bend or twist the turbocharger inlet pipe or damage to the bellow on the turbocharger inlet pipe may occur.
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Disconnect the exhaust pressure (EP) sensor tube fitting.
3. Remove the EGR-oxidation catalytic converter (OC) pipe bracket-to-cylinder head bracket bolt and washer. Remove the EGR-OC pipe
bracket-to-LH cylinder head bolt, washers and the bracket.
^
Discard the bolts.