F 250 4WD Super Duty V8-6.4L DSL Turbo (2008)
3. Position the new LH turbocharger inlet pipe-to-turbocharger gasket and loosely install the EGR-OC bracket and new bolts.
4. Loosely install new LH turbocharger inlet pipe-to-exhaust manifold nuts.
5. NOTE: To aid in installation, the upper LH turbocharger inlet pipe-to-exhaust manifold stud is replaced with bolt part number W302649.
Loosely install a new LH turbocharger inlet pipe-to-exhaust manifold bolt.
6. Tighten the LH turbocharger inlet pipe-to-turbocharger upper 2 bolts.
^
Tighten to 25 Nm (18 lb-ft).
