F 250 4WD Super Duty V8-6.4L DSL Turbo (2008)
4. Position the new LH turbocharger inlet pipe-to-turbocharger gasket and loosely install the EGR-OC bracket and new bolts.
5. Loosely install new LH turbocharger inlet pipe-to-exhaust manifold nuts.
6. NOTE: To aid in installation, the upper LH turbocharger inlet pipe-to-exhaust manifold stud is replaced with bolt part number W302649.
Loosely install a new LH turbocharger inlet pipe-to-exhaust manifold bolt.
7. Install the RH turbocharger inlet pipe-to-exhaust manifold gasket and position the RH turbocharger inlet pipe into the vehicle.
8. Position a new RH turbocharger inlet pipe-to-turbocharger gasket and install new bolts.
9. Loosely install new RH turbocharger inlet pipe-to-exhaust manifold nuts.
10. Tighten the LH turbocharger inlet pipe-to-turbocharger bolts.
^
Tighten to 25 Nm (18 lb-ft).
11. Tighten the 2 LH turbocharger inlet pipe-to-exhaust manifold nuts.
^
Tighten to 31 Nm (23 lb-ft).