F 250 4WD Super Duty V8-6.4L DSL Turbo (2008)
10. Tighten the RH turbocharger inlet pipe-to-EGR-OC bolts.
^
Tighten to 31 Nm (23 lb-ft).
11. Tighten the EGR-OC-to-turbocharger bracket bolts.
^
Tighten to 31 Nm (23 lb-ft).
12. CAUTION: Failure to install and correctly tighten the exhaust gas recirculation (EGR)-oxidation catalytic converter (OC) pipe bracket
bolt will result in damage to the horizontal EGR cooler and possible engine damage.
Tighten the EGR-OC bracket-to-cylinder head bracket bolt.
^
Tighten to 31 Nm (23 lb-ft).